European Cup live

List of contents of this article:

• 1. What should be done with the diskless system of the Internet care? About 300 computers, for servers and switches and...
• 2, The history of the diskless system of Internet caba
• 3, Installation settings of diskless system in Internet bar
• 4, Which diskless system is better for Internet bars
• 5, How to install the system on the diskless Internet bar client

What should be done with the diskless system of the Internet care? About 300 computers, for servers and switches and...

The diskless system includes a diskless server host (high configuration requirements, according to the number of your diskless workstations), a paid server and proxy server (general configuration is fine), multiple switches, according to your actual The number of international workstations is fixed, other network cables, crystal heads, etc.

The diskless network system using a disk array card only needs to install a RAID card on the server side, which saves a lot of money. For large diskless network systems, the saved hard disk cost will bring the network system upgrade to a higher level.

The principle of the diskless system is very simple. For example, we use many mobile phones to download the same video on the same website and transmit the information to the computer we need through high-speed connection. The update and installation of the game is only on the server side, which avoids the update experience one by one.

It's totally okay. If you have two or more computers, a switch or router is enough. If you only have one machine, you can also do it. It's the same with a virtual machine. In fact, it's very simple to have no plate..

The History of Internet Cafe Diskless System

The concept of the first Internet Cafe Diskless System in China was proposed by the Strong Network in 2002. With the development of network hardware, the local area network speed can be performed at 100 megabytes or even gigabit bandwidth. Good, which lays the foundation for the emergence of the diskless system in Internet cas.

No matter how it takes to achieve this purpose, at present, the electronic disk communication-based electronic hard disk (eDisk) system developed by Taiwan Shunyu Company is called a pseudo-diskless system, but because it also has no The characteristics of the disk network, so it can also be attributed to the diskless network.

I'm speechless. How many years has the diskless system been on the rise?In 2004, many Internet bas still had disk systems, and later many of them changed to diskless systems. Nowadays, solid-state high-speed hard disks are developing very rapidly. In the future, there will definitely be a high-speed server using solid-state ssd hard disk. At present, diskless has not been phased out at all.

Disk-free Internet Cafe is a relatively new type of business in the current Internet industry, which mainly provides users with "disk-free", "wireless" and "time-lag-free" office modes. The emergence of this model has played a great role in reducing the office cost of enterprises, improving employee efficiency, and realizing flexible office.

Installation settings of Internet caba diskless system

install "Ruiqi diskless XP client" in the normal way.After the installation is completed, select "Use Network Connection" as "Local Connection" in the "System Configuration" dialog box that appears, and enter the IP address of the sharp diskless server in the "Server IP Address", which is the "1916100" or "1916110" mentioned above.

Double-click "CLIENT.EXE" to start the client installer. Click "Next" by default until "Done". Then enter "Server IP Address": "19161" and click "OK" to shut down. Set the client to start the network. Remove the hard disk.

If the built-in DHCP component is selected, the BOOTP mode cannot be configured to start the diskless workstation. When selecting the DHCP component, you can not install the Microsoft DHCP component.

Use the hard disk to make a system on the client, and then upload it to the server with the client software. Automatically form a mirror image, and then you can remove the hard disk to start by accessing the system mirror package on the server. All clients must support PXE network card startup. And clients with different configurations need separate mirroring support.

Which diskless system used in Internet bars is better

Among them, PXE (Preboot Execution Environment) is a commonly used diskless boot protocol. It allows the workstation to search and download bootpers and operating system images on the network, and then start the system through these images. RPL (Remote Load Protocol) is another common diskless boot protocol.

BXP diskless system BXP is a virtual network driver software successfully developed by Venturcom in the United States with the assistance of Microsoft in the United States. It can divide one or more virtual hard disks on the server., each virtual hard disk can support the startup of a PXE diskless terminal and can share the virtual hard disk image file established.

DOL is the best choice for server configuration. Like the client, the cost of server plus software is less than 8,000 yuan per server. 2 servers and 1 with 60 to run WINDOWS2000 system is very stable. In case of hardware failure, you can also use the client directly. Substitute.

How to install the system on the diskless Internet bar client

Install the game on the client, when selecting the installation path, directly enter I: game folder; after the game is installed, run it on the client desktop "Game Menu" is in the advanced settingSet the path and name in the middle. A password is required to enter the advanced settings. The password is: "qznetwork".

Question 1: What are the steps to install the Internet bar system? 10 machines, let me give you a simple way. Client: Install the system with deep ghostxp, any version is fine. Patch all systems with 360. Set the desktop icon, mainly the game menu.

Install the WINXP SP2 workstation version (all partitions are converted to NTFS format, and the XP system is installed on the C disk) according to the default method. When installing, set the computer name to "WKS001" and click "Next" until "complete" the network configuration of the client. Install the network card driver for the workstation.

Install the "Ruiqi Diskless XP Client" in the normal way.After the installation is completed, select "Use Network Connection" as "Local Connection" in the "System Configuration" dialog box that appears, and enter the IP address of the sharp diskless server in the "Server IP Address", which is the "1916100" or "1916110" mentioned above.

First, install the 2003 system on an 80GB hard disk in the normal way, install the motherboard, graphics card, network card, array card driver, and install all security patches. ( It is not recommended to install anti-virus software and firewalls.) Set the server computer name: "NXPSER", and the working group is: "SUBOY".