TNT Sports

List of catalogs in this article:

• 1, How to repair the dent of the car bumper?
• 2、Car's Where is the front bumper
• 3, To what extent can the front bumper of the car be replaced with a new front bumper
• 4, What is a car bumper?
• 5, Front bumper What is a cover

How to repair the dent of the car bumper?

1. Repair method I: Use hot water. At this stage, most of the front, rear, left and right bumpers of family cars on the market are forged of refined plastic materials. Boiling water can restore the sunken body. The big reason is also very simple. The plastic will become soft when heated, and it can be pushed out by heating up at the concave position.

2. Use hot water: At present, most of the front and rear bumpers of family cars on the market are made of special plastic materials. Boiling water can restore the concave car body. The reason is also very simple. The plastic will soften when heated, and the concave part can be topped out as long as it is heated.

3. Hot water repair. I believe that many car owners know something about the method of hot water repair of body dents, but this method only has obvious effect on the repair of body bumper dents, because the bumper is made of plastic and follows the principle of thermal expansion and cold contraction.

Where is the front bumper of the car

The bumpers of the car are at the head and rear of the car, called the front bumper and rear bumper respectively. Bumper function: It not only has the function of decoration, but also has the function of safety protection, vehicle decoration and improving the aerodynamic characteristics of the vehicle.

The car bumper is under the head of the car and the headlight, which is called the front bumper of the car; the rear of the car and below the headlights is called the rear bumper. The bumper is composed of the front anti-collision beam of the plastic bumper housing, two energy-absorbing boxes on the left and right, and other installation parts.

The front bumper of the motor vehicle is located at the front of the vehicle, under the hood. The material of the front bumper of the motor vehicle is plastic, which is mainly used to protect pedestrians and other vehicles.In the event of a collision, it can effectively cushion and avoid injury.

Car bumpers are generally the part under the front headlights, and the part below the rear headlights are called bumpers.

The front bumper of the car is at the bottom of the front of the vehicle. The front bumper of a car refers to the protective device installed in the front of the vehicle to protect the vehicle from damage in collisions or other accidents.

Car bumpers are assembled in the front and rear of the car respectively. The front bumper is located at the front of the car, and the rear bumper is located at the rear of the car. At first, car bumpers were made of metal materials, but with the development of the technology industry, most car bumpers are now made of plastic.

How bad is the front bumper of the car? How bad can the insurance replace the new front bar

Among all the exterior parts of the car, the most easily damaged part is the front and rear bumpers. If the bumper is seriously deformed or broken, it can only be replaced. However, in general, if the bumper is only deformed by a gentle impact, or a very serious crack appears, there is a way to repair it without replacing it.

In view of what you said, the insurance company can only compensate for the repair and baking of the front bar.

Unless in one case, the insurance company may replace you with a new one. The car is a luxury car, etc., and then affects driving safety, which is also a particularly serious situation that can only be replaced with a new one. It's normal for the car to bump. The bumper is all plastic. If you hit it a few more times, you won't feel it, and you won't be so entangled. Calm down.

Under normal circumstances, car insurance claims are prioritized by repair. If it needs to be replaced, the degree of damage must first meet the standards required by the insurance company before it can be replaced. The reference terms of vehicle damage insurance are as follows: Article 16 Insured motor vehicles damaged by insurance accidents shall be repaired as much as possible.

What is a car bumper?

1. The bumper of the car is located in the front of the car.The front bumper and the rear part of the car are called the rear bumper. The bumper of the car is a kind of accessory consumable part of the car body. The bumper of the car is on the head of the car, which is called the front bumper of the car, and the rear bumper of the car is called the rear bumper.

2. The bumper is a safety device that absorbs and slows down external impact and protects the front and rear of the car body.

3. The car bumper is a safety device that absorbs and slows down the external impact and protects the front and rear of the car body. Many years ago, the front and rear bumpers of cars were stamped into channel steel with steel plates, which were riveted or welded together with the longitudinal beam of the frame, and there was a large gap with the car body, which looked very unsightly.

4. The bumper of the car is on the head of the car, which is called the front bumper of the car, and the one at the rear of the car is called the rear bumper. BumperLocated in most areas of the front and rear of the car, it mainly absorbs and relieves external impact and protects the front and rear safety devices of the car body.

5. The car bumper is a safety device that absorbs and slows down external impact and protects the front and rear of the car body. At present, in addition to maintaining the original protection function, the front and rear bumpers of the car should also pursue harmony and unity with the shape of the car body, and pursue its own lightweight. The front and rear bumpers of cars are made of plastic, which is called plastic bumpers.

What is the front bumper cover

1. Bumper guard. Toyota Motor Company is a well-known automobile manufacturing company headquartered in Toyota City, Aichi Prefecture, Japan and Bunkyo Ward, Tokyo. The Toyota chr front bumper bottom cover is the bumper guard plate, and the bumper is a safety device that absorbs and slows down external impact and protects the front and rear of the body.

2. The outer plate and cushioning materials of car bumpers are all made of plastic. The front and rear ends of the car are equipped with bumpers, which not only have decorative functions, but more importantly, are safety devices that absorb and mitigate external impacts, protect the body, protect the body and the occupant safety function.

3. No. The car bumper mask is a decorative cover on the outer surface of the bumper. The bumper has the functions of safety protection, decorating the vehicle and improving the aerodynamic characteristics of the vehicle.

4. The front bumper leather refers to the protective cover installed on the surface of the front bumper, which mainly plays the role of protecting the front bumper from scratches and collisions. It is usually made of plastic or rubber, which is soft and can absorb a certain impact force.

5. The front bumper mask refers to the bumper cover by masking the bumper.And the substance that covers the bumper is called skin. It can effectively add a layer of protection to the bumper, which looks better outside the vehicle.

6. The cover plate of the front bumper of the car is the trailer cover plate. There is a small hole in the cover plate, which can fix the trailer hook, which is used for traction.