DigiPlus

List of contents of this article:

• 1,DigiPlus What should I do if the computer starts up and the system is starting up?
• 2. What are the startup processes of What are the startup processes of the Windows+ operating system?
• 3, Do you need to select the startup system every time the computer is turned on?
• 4, How to set the default startup system

What should I do if the computer starts up and the system is starting up?

The solutions to the problem that the computer has been starting the interface and cannot enter include checking hardware equipment, checking software problems, anti-virus software, reinstalling the system, restarting the computer, and restoring the system. Check the hardware equipment, first troubleshoot the hardware, and check whether the computer is connected to an external hard disk, USB flash drive or CD/DVD.

Restart the computer. Sometimes, you just need to restart the computer to solve this problem. Press and hold the power button to turn off the computer, and then press the power button to restart the computer.Check whether the power supply and data cable of the computer are connected. Make sure that all power and data cables are firmly connected and the power supply voltage is normal.

If the computer keeps showing startup after power-on, it may be due to the following reasons: There is a problem during the system startup process: At this time, you can try to restart the computer, press the F8 or DEL key to enter the safe mode, and repair or restore the system.

If the computer keeps showing that it is starting, it means that there may be some problems with the system. Here are some possible solutions: restart the computer. Sometimes, you just need to restart the computer to solve this problem. Press and hold the power button to turn off the computer, and then press the power button to restart the computer. There is a bad channel on the disk.

Method 1: If this is a computer magnetIf there is a problem with the disk, please fix it (each disk should try to fix it or only repair a disk character prompted).

What are the startup processes of the Windows+ operating system?

The startup process of Windows operating system usually includes the following stepsSudden: Power-On Self-Test (POST): When the computer is powered up, the system hardware will perform a self-test, including checking whether the memory, processor, hard disk and other hardware are working normally.

To start the Windows operating system, you need to press the computer power button and wait a few seconds until the computer starts up. Then, you will see the BIOS/UEFI screen of the computer, which will show that the computer is self-testing the hardware and loading the operating system.

On INTEL-based computers, the startup process of Windows2000/XP can be roughly divided into 5 steps: pre-boot, startup, kernel loading, kernel initialization and user login.

WindoThe boot process of ws includes the following stages: the boot self-test stage is mainly to read the BIOS, and then self-check the memory, CPU, hard disk, keyboard and other devices. At this stage, the printed information displayed on the screen is self-checked.

The operations that occur during the whole process of the Windows 10 operating system are as follows. After pressing the computer power button, Power On Self Test (POST) is carried out first, and BlOS detects and identifies the hardware and completes the basic configuration of the hardware.

There are BIOS in many hardware of computers, the most common of which are: motherboard (also known as system BIOS), display card and some other devices (such as IDE controller, SCThere is BIOS in SI card or network card, etc.), among which the system BIOS is the protagonist we want to introduce, because the startup process of the computer is carried out under its control.

Do you need to select the startup system every time the computer is turned on?

Right-click the [Computer] icon on the desktop. Select [Properties] in the pop-up menu. Then select [Advanced System Settings]. Select the [Startup and Fault Recovery] option in the [System Properties] window and click [Settings].

First, find the "Computer" icon on the desktop, right-click, and then select the "Properties" option, as shown in the figure below. Secondly, after completing the above steps, find the "Advanced System Settings" option in the option button on the left, and then click it, as shown in the figure below.

Search for answers. I want to ask a question. Baidu knows the prompt information and knows that the baby can't find the question_! The problem may have been invalidated.

How to set the startup default startup system

Find [win Start Key] in the lower left corner of the computer desktop and click [Start Key] to enter the search page. After entering the search page, enter the content [Advanced System Settings] in the [Search Box] in the lower left corner.

Click the "Advanced System Settings" option on the right side of the "System" folder. Click the "Advanced"-"Settings" option in the pop-up "System Properties" window. Select "Default Operating System" in the "Startup and Failover" window and click the "OK" button below to exit.

Set the default startup system in the Windows system to open the "System Configuration" tool. First, press the "Win+R" key combination, enter the "msconfig" command, and press the Enter key to open the system configuration window.

Method 1: Set up in the system boot menu. When the computer starts up to the "Select Operating System" interface, click "Change Default Value or Select Other Options" below to enter the "Options" interface. Click "Change Timer" to enter the interface to modify the waiting time.

Now most computers are win10 systems. Some new users don't know how to set the default operating system. Next, I will introduce the specific operation steps to you.

In dual-system computers, if you often use which system, you can set the system option to enter by default after power-on.So, how should we operate it? Let's take a look at the method of setting the default boot system of the dual-system computer introduced next.